THERMAL IMAGING INSPECTION

Thermal Imaging Inspection Dallas TX

Thermal Imaging Inspection Dallas TX | Home Inspection Dallas TX | Dallas TX

Moisture Detection in Walls and Ceilings – Thermal imaging is a great tool that helps to identify water damage in walls, floors, and ceilings. By detecting the difference in temperature between a wet area and the surrounding dry areas, thermal imaging can help detect moisture issues that would not be visible during a limited visual home inspection. It is also great at identifying areas where the insulation contractor fails to insulate adequately.

Plumbing Inspections – Water leaks from the plumbing system often leak undetected until major damage has occurred. We can scan in, under, and around plumbing fixtures in the home to determine if there is active leaking going on. Since this tool is not a moisture meter, we will use it to find heat anomalies and then pursue the issue further to determine the leak’s source and cause.

Thermal image scanning can detect temperature anomalies in the plumbing system not visible to the naked eye, which may be a precursor to a larger issue. The resulting Thermal Image Scan report can be a great aid for the repair plumber to address the identified issues.

Wood-Destroying Insect Activity – This technology can detect significant wood-destroying insect activity due to the heat from active infestations. That’s right, active termite activity produces a great deal of heat that is often visible to the infrared camera. Minor activity may not be detectable, but this can identify areas not normally visible to the naked eye. And then, the appropriate professional can conduct a more invasive or technically exhaustive inspection.

Energy Audits – We do not currently specialize in performing energy audits, but thermal imaging has been a great tool to help homeowners save money.  We can identify heat loss and/or cold air influx and suggest corrective actions to help improve the energy efficiency of residential and commercial structures.

Once we identify the energy-wasting areas, then we can make a dramatic difference in energy consumption, which means less money out of pocket.

Flat Roof Inspections – If you have a leak on a new to mid-life flat roof and have been told that a roof is needed, then call us first. We may be able to save you a substantial amount of money. Thermal imaging can detect the precise location of the leak and mark the defective areas. But obviously, if the roof is older, you should forego the thermal imaging and invest in new roofing.

Michael Vacha was so thorough and very patient with me in regards to all of the questions I asked. He took his time and explained everything I asked and even gave examples so I could better understand. I would definitely recommend him to anyone needing a detailed inspection on their house. –  LILMIKE JR

Electrical Inspection –  Loose or dirty electrical connections and other electrical anomalies can cause power outages and possible fires. We can inspect the electrical panels and receptacles to detect issues before a costly outage occurs. Thermal imaging can detect hot spots in the electrical system that are not visible to the naked eye. These hot spots can be a precursor to a larger issue. The resulting report can greatly aid the repair electrician in addressing the issues.

Abnormal heating due to high resistance or excessive current flow is the root cause of many issues in electrical systems. Infrared thermography allows us to see these invisible thermal signatures of impending damage before the damage occurs. When current flows through an electric circuit, part of the electrical energy turns into heat energy, which is normal. But, if there is abnormally high resistance in the circuit or abnormally high current flow, it generates abnormally high heat, which is wasteful, potentially damaging, and abnormal.

Infrared electrical inspections find hot spots caused by defects in connections and components. We use Infrared thermography to find areas of excess heat (caused by increased resistance) to correct problems before a component fails. This could cause damage to the component, creating safety hazards and productivity loss. Note that increased heating is a sign of failure. Certainly, infrared is the best diagnostic tool available for finding these hot connections in the early stages of degeneration.

Schedule Your Home Inspection Dallas, TX Today!

What Thermal Image Scanning is NOT?

MOISTURE METER –The infrared thermal imaging camera is NOT a moisture meter. It simply identifies thermal anomalies. This device greatly aids in identifying areas that need further investigation.

X-RAY VISION – The infrared thermal imaging camera is NOT an X-ray vision scope. It does not provide the user with an immediate Superman S on their chest with the ability to clearly see inside walls. Instead, it identifies thermal differences.

SILVER BULLET – The infrared thermal imaging camera is NOT a silver bullet solution. But when in conjunction with other technologies, thermal imaging helps us identify issues that are rarely identified during the limited visual home inspection process.

RISK ELIMINATOR – The infrared thermal imaging camera does NOT completely remove the risks of concealed damage.

PLEASE NOTE: It is deceptive to claim that thermal imaging detects moisture because the best that it can do is detect thermal differences. Using the infrared camera to help discover moisture issues is helpful. We can then use moisture meters and other diagnostic tools to identify their source.

Moisture equals mold – Whenever a leak and moist conditions exist longer than 72 hours, then mold can form. This fact is a reality and the infrared camera can quickly, and in a non-invasive manner, help identify these issues. But remember, the infrared camera identifies the heat signatures and does not measure the moisture content.

Schedule Your Home Inspection in Dallas, TX, Today!

Other Inspections:
Swimming Pool
Sprinkler System
Pier and Beam
Termite inspections

Want to know the details of our inspection process?

CLICK HERE


 

Be Informed Inspections | Dallas-Fort Worth Home InspectionsLocated in the heart of Texas, Dallas is a vibrant city with a booming economy and plenty of property options for those looking for a big city feel with great food, diverse culture, and convenient locations. Whether you’re buying or selling a home in Dallas, the professionals at Be Informed Inspections are here to help you make informed buying decisions.

Since 2006, we’ve been providing a range of inspection services to clients in Dallas, including buyer inspections, pre-listing inspections, and new construction inspections. Our top priority is always the best interests of our clients, and we strive to deliver the highest level of professionalism and service. Our home inspectors are trained and highly skilled, and they will provide you with an on-site oral report and a comprehensive narrative report with high-definition photos within 24 hours of the inspection.

Contact us today at (972) 827-2366 or schedule an inspection online through our website. We look forward to serving you at

Be Informed Inspections.

0/5 (0 Reviews)
0/5 (0 Reviews)